Removal and replacement procedures 37
8.
Disconnect the signal and power cables on each side of the power block.
To replace the component, reverse the removal procedure.
Fan board
To remove the component:
1.
Power down the MDS600 ("
Power down
" on page
24
).
2.
Disconnect all cables.
3.
Remove all power supplies ("
Power supply
" on page
30
).
4.
Remove the fans ("
Fan
" on page
29
).
5.
Remove the hard drives ("
Hard drive
" on page
26
).
6.
Be sure the hard drive drawer is closed all the way.
7.
Remove the I/O modules ("
Hot-plug I/O module
" on page
30
).
8.
Remove the power block ("
Power block
" on page
35
).
9.
Remove the hard drive drawer ("
Hard drive drawer
" on page
31
).
10.
Remove the four T-10 Torx screws securing the fan cage to the hard drive drawer.
Summary of Contents for StorageWorks 600 All-in-One
