Removal and replacement procedures 32
9.
Push up and hold the two release mechanisms on the I/O bays, and then push the drawer forward
about 15 cm (6 in).
WARNING:
TIP HAZARD! To reduce the risk of personal injury or damage to the equipment,
do not extend the hard drive drawers beyond the supporting surface when the unit is not
installed in a rack.
WARNING:
To reduce the risk of personal injury or damage to the equipment, ensure that only
one hard drive drawer is extended at a time.
WARNING:
To reduce the risk of electric shock or damage to the equipment:
•
Never reach inside the chassis while the system is powered up.
•
Perform service on system components only as instructed in the user documentation.
10.
Remove the power block ("
Power block
" on page
35
).
11.
Extend the hard drive drawer until it clicks.
Summary of Contents for StorageWorks 600 All-in-One
