HP StorageWorks 2/64 - Core Switch Command Reference Manual Download Page 510

Page: 510 / 830

510 Fabric OS commands

Displays port status.

Synopsis

portshow [

slotnumber/

]

portnumber

Availability

all users

Description

Use this command to display status information for the specified port, as shown in

Table 17

. Information

varies with the switch model and port type.

portShow

Table 17

portShow

display fields

Field

Description

portName

Name assigned to the port by the command of the same name.

portHealth

Current health of the port (Fabric Watch license required).

Authentication

Authentication type and associated parameters, if applicable, used on

the port at port online or when enabling security, whichever occurs last.

States include:

None

FCAP

DHCHP

No authentication was done.

FCAP authentication was done.

DH-CHAP authentication was done. It also displays the

DH group and hash used for authentication.

portDisableReason

The reason that a port has been disabled, if it has not been disabled by

portDisable

portCfgPersistentDisable

portCFlags

Port control flags.

portFlags

Bit map of port status flags, including information on the type of port,

whether it is fully online, and whether logins have been accepted on it.

portType

Port type and revision numbers.

portState

Port SNMP state:

Online

Offline

Testing

Faulty

Persistently

Disabled

Upand running

Not online; portPhys gives details

Running diagnostics

Failed diagnostics

Persistently disabled

portPhys

Port physical state:

Summary of Contents for StorageWorks 2/64 - Core Switch































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for StorageWorks 2/64 - Core Switch

Reviews:

Related manuals for StorageWorks 2/64 - Core Switch

Brands by name

Popular brands

HP StorageWorks 2/64 - Core Switch, Command Reference Manual

Search results

Summary of Contents for StorageWorks 2/64 - Core Switch

Reviews:

Related manuals for StorageWorks 2/64 - Core Switch

Brands by name

Popular brands