HP SN6000B, Hardware Reference Manual

Page: 40 / 60

Table 9 Power supply specifications (continued)
Values Specification
the form of AC cycles, or multiple AC cycles greater than 10 ms and less
than 150 ms, must not exceed 15 A peak.
150 W at 12 VDC Single power supply output
12.5 A at 12 VDC Maximum current
Both AC lines fused Input line protection
110 W with all 48 ports populated with 16 Gb/s SWL optical media System power consumption
72 W with empty chassis and no optical media
Environmental requirements
Table 10 (page 40) lists the acceptable environmental ranges for both operating and nonoperating
(such as during transportation or storage) conditions.
Table 10 Environmental requirements
Acceptable range during nonoperation Acceptable range during operation Condition
-25º to 70ºC (-13º to 158ºF) 0º to 40ºC (32º to 104ºF) Ambient
temperature
10% to 90% RH non-condensing, at 70ºC (158ºF) 10% to 85% RH non-condensing, at 40ºC (104ºF) Humidity
0 to 12 km (39,370 ft) above sea level 0 to 3 km (9,842 ft) above sea level Altitude
33 G, 11 ms, half-sine wave, 3/e.g. Axis 20 G, 6 ms, half-sine wave Shock
2.0 G sine, 1.1 gms random, 5–500 Hz 0.5 G sine, 0.4 gms random, 5–500 Hz Vibration
N/A Maximum - 71.36 cubic m/h (42 cubic ft/m) Airflow
Nominal - 59.47 cubic m/h (35 cubic f/m)
N/A 338 BTU/hr (32-port configuration) Heat dissipation
375 BTU/hr (48-port configuration)
General specifications
Table 11 General specifications
Description Specification
F_Port, E_Port, M_Port, EX_Port, and D_Port Configurable port types
Nonblocking shared-memory switch System architecture
PowerPC 440EPx at 667 MHz System processor
FC-PH ANSI FC protocol
FC Class 2 and Class 3 Modes of operation
Complies with FC-SW-3 Rev. 6.6 Fabric initialization
Complies with FC-IP 2.3 of FCA profile FC-IP
768 Gb/s Aggregate switch I/O bandwidth
Less than 700 ns with no contention (destination port is free) FC port-to-port latency
420 million frames per second (for Class 2, Class 3, and Class F frames for
the 48 port chassis) Aggregate switching capacity
40 Specifications