HP rp7420, Service Manual, Page: 59 / 127

Figure 4-8 The
lc
Command Screen
NOTE: The value in the “IP address” field has been set at the factory. Obtain the actual
LAN IP address from the customer.
4. At the Do you want to modify the configuration for the customer LAN? prompt, enter
y
.
The current IP address is shown; and the following prompt displays: Do you want to modify
it? (Y/[N])
5. Enter
y
.
6. Enter the new IP address.
The customer must provide this address for network interface 0.
7. Confirm the new address.
8. Enter the MP Network name.
This is the host name for the customer LAN. The name can be as many as 64 characters in
length, and include alphanumeric characters: - (dash), _ (under bar), . (period), or a space.
HP recommends that the name be a derivative of the complex name. For example,
Acme.com_MP
.
9. Enter the LAN parameters for the Subnet mask and Gateway address fields.
This information must come from the customer.
10. The server indicates the parameters have been updated and returns to the MP Command
Menu prompt (MP:CM>).
11. To check the LAN parameters and status, enter the
ls
command at the MP Command Menu
prompt (MP:CM>).
A screen similar to Figure 4-9 displays, enabling verification of the settings:
MP Core I/O Connections 59