HP R2200 INTL, User Manual

Page: 20 / 61

Installation 20
3.
Insert screws through the rack into the mounting rail and the front of each mounting bracket. Do not
completely tighten the screws.
4.
Insert screws through the rack into the mounting rail and the rear of each mounting bracket. Do not
completely tighten the screws.
5.
Wait until the unit is installed and the brackets are adjusted before tightening the screws.
6.
Tighten the wing nuts.
WARNING: Uneven mechanical loading in the rack may cause a hazardous condition.
CAUTION: Always plan the rack installation so that the heaviest item is on the bottom of the rack. Install
the heaviest item first, and continue to populate the rack from the bottom to the top.
7.
With one person on each side, lift the chassis to rail level and slide the chassis on the mounting rails.
8.
Attach the chassis to the rack using the supplied screws.