Installation 24
IMPORTANT:
If using HPPM, connect the Management Server to an unswitched output receptacle ("
UPS
R/T2200 INTL rear panel
" on page
9
, "
UPS R/T2200 NA/JPN/TWN rear panel
" on page
8
), and then set
the Management Server as the last device to shutdown, ensuring that all connected load devices are
shutdown gracefully.
NOTE:
To install and configure the software, see the software user guide. The software user guide is
available for download from the HP website (
http://www.hp.com/go/rackandpower
).
Connecting the serial communications port
CAUTION:
Use only the computer interface cable supplied with the UPS to connect the communications
port to the host computer.
CAUTION:
Using a USB to serial converter cable will damage the UPS.
IMPORTANT:
Power management software requires the communications port to be appropriately cabled
to the host computer.
Summary of Contents for R2200 INTL
