manualshive.com logo in svg

HP R12000 XR, Maintenance And Service Manual

Share
Download
HP R12000 XR Maintenance And Service Manual Download Page 5

HP UPS R12000 XR Models Maintenance and Service Guide 

v 

  

 

HP CONFIDENTIAL

 Codename: Sierra Part Number: 221273-001 Last Saved On: 8/7/02 3:23 PM 

 

 

About This Guide 

This maintenance and service guide can be used for reference when servicing the HP UPS 
R12000 XR model.

 

 

 

WARNING:  To prevent personal injury from electric shock and hazardous energy 
levels, only authorized service technicians should attempt to repair this equipment. 
Improper repairs can create conditions that are hazardous. 

Audience Assumptions 

This guide is for service technicians. HP assumes you are qualified in the wiring and 
installation of high-voltage equipment and the local laws governing such installation. You 
should have specific experience in, or relating to, the installation and operation of UPSs. 

Symbols on Equipment 

The following symbols may be placed on equipment to indicate the presence of potentially 
hazardous conditions: 

 

 

WARNING:  This symbol, in conjunction with any of the following symbols, indicates 
the presence of a potential hazard. The potential for injury exists if warnings are not 
observed. Consult your documentation for specific details.  

 

 

This symbol indicates the presence of hazardous energy circuits or electric shock 
hazards. Refer all servicing to qualified personnel. 

WARNING:  To prevent personal injury from electric shock hazards, do not open this 
enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel. 

 

 

Weight in kg 

Weight in lb 

This symbol indicates that the component exceeds the recommended weight for 
one individual to handle safely. 

WARNING:  To prevent personal injury or damage to the equipment, observe 
local occupational health and safety requirements and guidelines for manual 
material handling. 

Summary of Contents for R12000 XR






































































Reviews:

No comments

Brands by name

Popular brands

Load more brands