HP ProLiant XL270d Gen9, Maintenance And Service Manual

Page: 77 / 126

WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION:
To prevent damage to electrical components, take the appropriate anti-static precautions before
beginning any installation, removal, or replacement procedure. Improper grounding can cause
electrostatic discharge.
To remove the component:
Procedure
1. Back up all server data.
2. Power down the server .
3. Disconnect all peripheral cables from the server front panel.
4. Remove the server from the chassis .
5. Place the server on a sturdy, level surface.
6. Remove the access panel .
7. Remove the air baffle .
8. Remove the drive cage assembly .
9. Disconnect any internal cables that are connected to the expansion board.
10. Remove the failed expansion board.
• Slot 9
• Slot 10
Removal and replacement procedures 77