HP ProLiant XL270d Gen9, Maintenance And Service Manual

Page: 47 / 126

Peer-to-peer mode for 4:1 PCI riser modules
Number
of GPUs Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 7 Slot 8
2 GPU GPU Blank Blank Blank Blank Blank Blank
4 GPU GPU Blank Blank GPU GPU Blank Blank
6 GPU GPU GPU GPU GPU GPU Blank Blank
8 GPU GPU GPU GPU GPU GPU GPU GPU
Peer-to-peer mode for 8:1 PCI riser modules
Number
of GPUs Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 7 Slot 8
2 GPU GPU Blank Blank Blank Blank Blank Blank
4 GPU GPU GPU GPU Blank Blank Blank Blank
6 GPU GPU GPU GPU GPU GPU Blank Blank
8 GPU GPU GPU GPU GPU GPU GPU GPU
NVIDIA Tesla P4 GPU support matrix
Number
of GPUs Left Side Right Side
Slot 1 Slot 2 Slot 3 Slot 4 Slot 5 Slot 6 Slot 7 Slot 8
Baffle Required Required NA NA Required Required NA NA
2 GPU GPU Blank Blank Blank Blank Blank Blank
4 GPU GPU Blank Blank GPU GPU Blank Blank
6 GPU GPU GPU GPU GPU GPU Blank Blank
8 GPU GPU GPU GPU GPU GPU GPU GPU
Replacing the failed AMD S9150 GPU accelerator
Procedure
1. Back up all server data.
2. Power down the server .
3. Disconnect all peripheral cables from the server front panel.
4. Remove the server from the chassis .
5. Place the server on a sturdy, level surface.
6. Remove the side panel .
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless all bays are
populated with either a component or a blank.
Peer-to-peer mode for 4:1 PCI riser modules 47