HP ProLiant XL230a Gen9 User Manual Download Page 11

Page: 11 / 80

Component identification 11

Item

Description

Drive box 2, drive bay 1

Drive box 2, drive bay 2

Hot-plug drive LED definitions

Item LED

Status

Definition

Locate

Solid blue

The drive is being identified by a host application.

Flashing blue

The drive carrier firmware is being updated or requires an update.

Activity ring

Rotating green

Drive activity

Off

No drive activity

Do not remove

Solid white

Do not remove the drive. Removing the drive causes one or more of

the logical drives to fail.

Off

Removing the drive does not cause a logical drive to fail.

Drive status

Solid green

The drive is a member of one or more logical drives.

Flashing green

The drive is rebuilding or performing a RAID migration, strip size
migration, capacity expansion, or logical drive extension, or is
erasing.

Flashing
amber/green

The drive is a member of one or more logical drives and predicts
the drive will fail.

Flashing amber The drive is not configured and predicts the drive will fail.

Solid amber

The drive has failed.

Off

The drive is not configured by a RAID controller.

I/O module bay numbering

I/O modules are specific to each server and are installed in the rear of the chassis.

Summary of Contents for ProLiant XL230a Gen9

















































































Search results

Summary of Contents for ProLiant XL230a Gen9

Reviews:

Related manuals for ProLiant XL230a Gen9

Brands by name

Popular brands

HP ProLiant XL230a Gen9, User Manual

Search results

Summary of Contents for ProLiant XL230a Gen9

Reviews:

Related manuals for ProLiant XL230a Gen9

Brands by name

Popular brands