HP ProLiant SL335s G7, Maintenance And Service Manual

Page: 67 / 83

Connectors, switches, and LEDs 67
Item Designator Description
24 J29 Riser connector
25 U5 SP5100
CAUTION: The TPM is not a customer-removable part.
Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security
rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider
the system compromised and take appropriate measures to ensure the integrity of the system data.
If you suspect a TPM board failure, leave the TPM installed and remove the system board. Contact
an HP authorized service provider for a replacement system board and TPM board.
Jumpers and switches
Table 5
System configuration jumper settings
Jumper Status
J60 1-2, default setting, 2-3 clear CMOS
All switches are off as default.
Table 6
System maintenance switch
Pos. Description Definition
1 iLO Security override OFF = normal
ON = security disabled
2 Configuration lock OFF = normal
ON = configuration locked
3 Reserved —
4 ROM debug OFF = normal
ON = ROM debugger enabled
5 Password disable OFF = normal
ON = power on password disabled
6 Reset configuration OFF = normal
ON = invalidates/resets configuration