HP ProLiant SL335s G7 Maintenance And Service Manual Download Page 55

Page: 55 / 83

Removal and replacement procedures 55

System board removal and replacement procedure

To remove the system board:

NOTE:

The system board spare part kit does not contain processors or DIMMs. These have to be

moved from the defective board and installed on the new board. Follow directions on the removal

and replacement of these parts.

Disconnect all cables from the system board.

Remove the six screws that secure the system board to the tray.

Release the system board from the tray.

Figure 40

Removing the system board

IMPORTANT:

Do not discard the screws. If the system board is removed, you must keep them for

future use.

To replace the system board:

Put the system board in the tray. The screw holes on the tray should align with the holes on the system board.

Fasten the screws to secure the system board to the tray.

Connect all cables related to the system board.

Summary of Contents for ProLiant SL335s G7




















































































Search results

Summary of Contents for ProLiant SL335s G7

Reviews:

Related manuals for ProLiant SL335s G7

Brands by name

Popular brands

HP ProLiant SL335s G7, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant SL335s G7

Reviews:

Related manuals for ProLiant SL335s G7

Brands by name

Popular brands