manualshive.com logo in svg

HP ProLiant SL165s G7, Maintenance And Service Manual

Share
Download
HP ProLiant SL165s G7 Maintenance And Service Manual Download Page 44

 

 

Removal and Replacement Procedures  44  

 

 

Figure 19

 

Removing a Memory module 

 

 

CAUTION:

 Place the memory module on a static-dissipating work surface or inside of an anti-static 

bag. 

To install a memory module:  

1.

 

Align the notch on the bottom edge of the module with the keyed surface of the DIMM slot and 
then press the module fully into the slot. 

2.

 

Firmly press the holding clips inward to secure the memory module in place. 

Figure 20

 

Installing a Memory module 

 

 

CAUTION:

 The memory slots are structured to ensure proper installation. If you insert a memory 

module but it does not fit easily into the slot, you may have inserted it incorrectly. Double-check the 

orientation of the module and reinsert.  If the holding clips do not close, the module is not inserted 

correctly. 

 

Summary of Contents for ProLiant SL165s G7


















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands