HP ProLiant SL165s G7 Maintenance And Service Manual Download

Page: 52 / 81

Removal and Replacement Procedures 52

Figure 32

Reinstalling

the165 system board to the tray

Power Supply Unit (PSU)

Power supply unit is located on the rear panel of the server and it’s a standard 750W or 1200W

PSU with PFC (power factor correction) function.

Figure 33

Power supply unit

WARNING:

Take note of the following reminders to reduce the risk of personal injury from electric

shock hazards and/or damage to the equipment.

•

Installation of power supply units should be referred to individuals who are qualified to service server

systems and are trained to deal with equipment capable of generating hazardous energy levels.

•

DO NOT open the power supply unit. There are no serviceable parts inside it.

To remove the power supply:

Press the handle.

Slide the power supply out of the power supply cage.

Summary of Contents for ProLiant SL165s G7


















































































Search results

Summary of Contents for ProLiant SL165s G7

Reviews:

Related manuals for ProLiant SL165s G7

Brands by name

Popular brands

HP ProLiant SL165s G7, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant SL165s G7

Reviews:

Related manuals for ProLiant SL165s G7

Brands by name

Popular brands