HP ProLiant SL165s G7 Maintenance And Service Manual Download

Page: 71 / 81

Diagnostic tools and Setup Utilities 71

Boot Menu

Figure 51

Boot menu of the BIOS Setup Utility

Use this menu to configure the boot settings.

•

Boot Setting Configuration

– Sets which options to run during system boot up. Press

Enter

access the related submenu. For details on the submenu options, see the “Boot Settings

Configuration submenu” section.

•

Boot Device Priority

– Use this screen to specify the order in which the system checks for a boot

device.

•

Hard Disk Drives

– Use this screen to specify the boot sequence from the available devices.

•

USB Device Boot Priority –

Use this screen to control the latest added USB Functions by setting the

item to the desired value.

Summary of Contents for ProLiant SL165s G7


















































































Search results

Summary of Contents for ProLiant SL165s G7

Reviews:

Related manuals for ProLiant SL165s G7

Brands by name

Popular brands

HP ProLiant SL165s G7, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant SL165s G7

Reviews:

Related manuals for ProLiant SL165s G7

Brands by name

Popular brands