Removal and replacement procedures 48
3.
Press and hold the processor retaining bracket in place, and then close each processor locking
lever. Press only in the area indicated on the processor retaining bracket.
4.
Clean the old thermal grease from the bottom of the heatsink with the alcohol swab. Allow the
alcohol to evaporate before continuing.
5.
Apply all the grease to the top of the processor in the following pattern to ensure even distribution.
6.
Install the heatsink ("
).
7.
Install the system air baffle.
8.
If removed, install the PCI air baffle.
9.
Install the access panel.
10.
Return the server to an upright position.
11.
Lock the front bezel.
12.
Connect each power cord to the server.
13.
Connect each power cord to the power source.
