Operations 26
CAUTION:
For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed.
1.
Power down the server (on page
23
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Unlock the front bezel (on page
24
).
4.
Place the server on its side.
5.
Remove the access panel:
a.
Loosen the access panel thumbscrews.
b.
Slide the access panel back.
c.
Lift the access panel away from the chassis.
Install the access panel
1.
Install the access panel:
a.
Place the access panel on the chassis, and slide it toward the front of the server.