manualshive.com logo in svg

HP ProLiant ML310 Generation 5p, User Manual

Share
Download
HP ProLiant ML310 Generation 5p User Manual Download Page 68

68 

 HP ProLiant ML310 Generation 2 Server User Guide 

 

Automatic Server Recovery..........................................................................................................

68

ROMPaq Utility............................................................................................................................

68

System Online ROM Flash Component Utility............................................................................

69

Erase Utility..................................................................................................................................

69

Management Agents .....................................................................................................................

70

HP Systems Insight Manager .......................................................................................................

70

USB Support and Functionality....................................................................................................

70

 

 

Automatic Server Recovery 

ASR is a feature that causes the system to restart when a catastrophic operating 
system error occurs, such as a blue screen, ABEND, or panic. A system fail-safe 
timer, the ASR timer, starts when the System Management driver, also known as 
the Health Driver, is loaded. When the operating system is functioning properly, 
the system periodically resets the timer. However, when the operating system 
fails, the timer expires and restarts the server. 

ASR increases server availability by restarting the server within a specified time 
after a system hang or shutdown. At the same time, the HP SIM console notifies 
you by sending a message to a designated pager number that ASR has restarted 
the system. You can disable ASR from the HP SIM console or through RBSU. 

 

ROMPaq Utility 

Flash ROM enables you to upgrade the firmware (BIOS) with system or option 
ROMPaq utilities. To upgrade the BIOS, insert a ROMPaq diskette into the 
diskette drive and boot the system. 

The ROMPaq utility checks the system and provides a choice (if more than one 
exists) of available ROM revisions. This procedure is the same for both system 
and option ROMPaq utilities. 

For more information about the ROMPaq utility, refer to the HP website 
(

http://www.hp.com/servers/manage

). 

 

 

Summary of Contents for ProLiant ML310 Generation 5p





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands