manualshive.com logo in svg

HP ProLiant ML310 Generation 5p, User Manual

Share
Download
HP ProLiant ML310 Generation 5p User Manual Download Page 36

36 

 HP ProLiant ML310 Generation 2 Server User Guide 

 

Installing the Operating System 

To operate properly, the server must have a supported operating system. For the 
latest information on supported operating systems, refer to the HP website 
(

http://www.hp.com/go/supportos

). 

Two methods are available to install an operating system on the server: 

• 

• 

SmartStart assisted installation—Insert the SmartStart CD into the CD-ROM 
drive and reboot the server.  

Manual installation—Insert the operating system CD into the CD-ROM drive 
and reboot the server. This process may require you to obtain additional 
drivers from the HP website (

http://www.hp.com/support

). 

Follow the on-screen instructions to begin the installation process. 

For information on using these installation paths, refer to the SmartStart 
installation poster in the HP ProLiant Essentials Foundation Pack, included with 
the server. 

 

Registering the Server 

To register a server, refer to the registration card in the HP ProLiant Essentials 
Foundation Pack or the HP Registration website (

http://register.hp.com

). 

 

 

Summary of Contents for ProLiant ML310 Generation 5p





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands