Removal and replacement procedures 43
To remove the component:
1.
Power down the server (on page
25
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Place the server on its side.
4.
Remove the access panel (on page
25
).
5.
If installed, remove the PCI air baffle (on page
27
).
6.
Remove the system air baffle (on page
28
).
7.
Disconnect the battery cable from the system board connector and remove the HP Smart Storage
Battery.
To replace the component, reverse the removal procedure.
DIMMs
To remove the component:
1.
Power down the server (on page
25
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Place the server on its side.
4.
Remove the access panel (on page
25
).
5.
If installed, remove the PCI air baffle (on page
27
).
6.
Remove the system air baffle (on page
28
).
7.
Open the DIMM slot latches.
Summary of Contents for ProLiant ML110 Gen9
