HP ProLiant DL585 Page 103 User Manual Download | Manualshive

Page: 103 / 183

background image

Server Configuration and Utilities

5-6

HP ProLiant DL585 Server User Guide

Automatic Server Recovery

The Automatic Server Recovery menu includes the following items:

•

Automatic Server Recovery—Enables you to enable or disable the Automatic
Server Recovery option.

•

Thermal Shutdown—Enables you to disable or enable the system automatic
shutdown feature caused by a thermal caution event. This option is enabled by
default. HP does not recommend disabling this feature.

Server asset tags

The Server Asset Tags menu enables you to access the Server Info Text. Server Info
Text enables you to identify the system with an asset tracking number.

Advanced options

The Advanced Options menu enables you to configure advanced options of the
system. The following selections are available in this menu:

•

MPS Table Mode—Enables you to change the APIC table setting. The APIC
table setting is automatically set by the OS Selection setting.

•

POST Speed Up—Enables you to enable or disable the complete memory test.

•

Wake On LAN—Enables you to enable or disable Wake On LAN Support.

•

Erase Non-Volatile Memory—Enables you to reset the configuration settings to
their factory defaults.

•

Node Interleaving—Enables you to enable or disable node interleaving.

•

Advanced ECC Support—Sets the system to use the standard four-way DIMM
configuration.

«
...
101
102
103
104
105
...
»

Summary of Contents for ProLiant DL585
























































































































































































Reviews:

No comments

Related manuals for ProLiant DL585

Brand: D-Link Pages: 11

AirPlus DWL-810

Brand: D-Link Pages: 8

Brand: D-Link Pages: 84

BladeCenter HS23

Brand: IBM Pages: 30

System x3950 X6

Brand: IBM Pages: 53

Brand: WiebeTech Pages: 4

Brand: bintec elmeg Pages: 33

SuperServer E102-9W-C

Brand: Supermicro Pages: 103

Brand: LaCie Pages: 48

Brand: ZyXEL Communications Pages: 422

Brand: Macally Pages: 37

Momentus ST320LM010

Brand: Seagate Pages: 33

SolarLEAF SL-1000

Brand: Yotta Pages: 13

Brand: IBM Pages: 24

Brand: E-Z-RECT Pages: 2

Brand: Matrix Switch Corporation Pages: 54

Brand: Gigabyte Pages: 2

88643RU - System x3850 - 8864

Brand: IBM Pages: 192

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands