Removal and replacement procedures 51
5.
Remove the heatsink blank.
To replace the component, reverse the removal procedure.
Heatsink
To remove the component:
1.
Power down the server (on page
31
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
32
).
o
Remove the server from the rack (on page
34
).
4.
Remove the access panel ("
Access panel
" on page
37
).
5.
Remove the air baffle ("
Air baffle
" on page
42
).
6.
Remove the heatsink:
a.
Loosen one pair of diagonally opposite screws halfway, and then loosen the other pair of screws.
b.
Completely loosen all screws in the same sequence.
Summary of Contents for ProLiant DL380e Gen8
