Removal and replacement procedures 42
To install the component:
1.
Install the new optical drive cage. Only the redesigned optical drive cage is available for spare
installation.
2.
Perform steps 1-5 of the removal procedure in reverse sequence to complete the new optical drive cage
installation.
Air baffle
To remove the component:
CAUTION:
For proper cooling, do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1.
Power down the server (on page
31
).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page
32
).
o
Remove the server from the rack (on page
34
).
4.
Remove the access panel ("
Access panel
" on page
37
).
Summary of Contents for ProLiant DL380e Gen8
