HP ProLiant DL380 G5 DPSS Administration Manual Download Page 33

Page: 33 / 168

gl0061

Drive carrier

Release lever

Release button

Fault/ID bicolor LED (amber or blue)

Online LED (green)

Figure 10 MSA20 drive (in carrier)

The blue ID LED illuminates when you press the unit identi

cation button on the rear of the enclosure.

This LED also illuminates when the drive, or an array containing the drive, is selected in a management

application such as the HP Array Con

guration Utility (ACU).

The amber LED on a drive illuminates when the drive has failed, or is predicted to fail in the near future.
For more information about the meaning of the various hard drive LED illumination patterns, see

Table 8

HP ProLiant DL380 G5 Storage Server

Summary of Contents for ProLiant DL380 G5 DPSS









































































































































































Search results

Summary of Contents for ProLiant DL380 G5 DPSS

Reviews:

Related manuals for ProLiant DL380 G5 DPSS

Brands by name

Popular brands

HP ProLiant DL380 G5 DPSS, Administration Manual

Search results

Summary of Contents for ProLiant DL380 G5 DPSS

Reviews:

Related manuals for ProLiant DL380 G5 DPSS

Brands by name

Popular brands