QuickSpecs
HPE ProLiant DL20 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
Page 18
•
Only one FlexibleLOM can be added to the server. These options are upgradeable and can be
changed from the original configuration after the server is shipped.
•
For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
•
Please see the QuickSpecs for Technical Specifications and additional
information:
http://www.hp.com/go/ProLiantNICs
.
HPE Networking
Select a standup NIC adapter from Core options-Networking section below,
•
Please see the QuickSpecs for Technical Specifications and additional
information:
http://www.hp.com/go/ProLiantNICs
.
•
These options are upgradeable and can be changed from the original configuration after the server
is shipped.
•
For 10Gb adapters, a minimum of two Gigabytes (2 GB) of server memory is required per each
adapter.
HPE Storage
Controllers
Select one or more
Storage options
from
Additional options section below.
•
The embedded B140i controller will operate in UEFI only mode. For legacy support an additional
controller will be needed, and for CTO orders please also select
the Legacy mode settings part,
758959-B22
•
This section may contain FIO options, please see HPE
Storage Controllers
section below.
•
FIO indicates that this option is only available as a factory installable option.
HPE I/O Expansion
Options
Select one Riser Kit
options
from
Core options section below.
•
It is mandatory to choose one riser kit option for DL20 Gen9 configurations
•
This section may contain FIO options, please see
HPE I/O Expansion Options section below.
•
FIO indicates that this option is only available as a factory installable option
HPE Rail Kits
One short friction rail kit
option is supported on
this HPE ProLiant Server
as given below.
•
Please take a moment to review the installation documentation that comes with the server to help
you with the installation of your Gen9 server.
•
See HPE Rack Options in Additional Options section of this QuickSpecs for more rack kit choices.
CAUTION:
Please refer to your installation instructions for proper tools and number of people to use
for any installation.
Hewlett Packard Enterprise recommends that a minimum of two people are required for all Rack
Server installations.
