QuickSpecs
HPE ProLiant DL20 Generation9 (Gen9)
Configuration Information - Factory Integrated Models
Page 17
•
HPE memory from previous generation servers are not qualified or warranted with this HPE
ProLiant Server.
•
HPE Standard Memory (UDIMM) is required to realize the memory performance improvements
and enhanced functionality listed in this document for this HPE
ProLiant
Server.
•
With one processor installed, four DIMMs slots are available.
•
For more information on ProLiant Energy Efficient Features,
see:
http://www.hp.com/go/proliant-energy-efficient
.
•
Depending on the memory configuration and processor model, the memory speed would run at
2133MHz. Please see Memory Population Table or the Online Memory Configuration Tool
at:
http://www.hp.com/go/ddr4config
.
HPE Power
Supplies
Select power supply from Core Options-Power Supplies section below:
•
Prior to selecting a power supply option, it is highly recommended that you review your server
configuration in the HPE Power Advisor tool to determine the right size power supply for your
server configuration. The HPE Power Advisor is located
at:
http://www.hp.com/go/hppoweradvisor
.
On RPS Enablement Kit power options, mixing of power supplies in the same RPS enablement kit is not
supported.
All power supplies must be of the same input voltage, output rating, and efficiency rating. If
non-matching power supplies are installed, you may receive an error message and/or experience
operational issues with your server.
•
HPE RPS require Redundant backplane kit and an RPS cable kit option for redundancy
Step 3: Choose Additional Factory Integratable Options
HPE Unique
Options
Select one or more Unique options
from
Core options section below.
•
This section may contain FIO options, please see the Unique options section below.
•
FIO indicates that this option is only available as a factory installable option.
HPE Drives
Select one
or more drives
from Core options-HPE Drives section below:
•
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the
server backplane) should operate at the same data transfer rate or the system bandwidth will be
negotiated down to an acceptable level for all components.
•
Hard drives have either a one year or three year warranty; refer to the specific hard drive
QuickSpecs for details.
•
The HPE ProLiant Gen9 Smart Storage solutions are equipped with re-designed Small Form Factor
(SFF 2.5 in) and Large Form Factor (LFF 3.5 in) hot plug carriers for HPE Qualified Hard Drives and
Solid State Drives. These new carriers provide status and activity indicators as well as caution
indicators for "Do Not Remove".
HPE Flexible LOM
Select a FlexibleLOM from Core options-Networking section below,
