HP ProLiant DL145 User Manual Download | Manualshive

Page: 57 / 105

background image

Operating System Installation and Software

5-2

HP ProLiant DL145 Server User Guide

Operating System Installation

To operate properly, the server must have a supported operating system. For the latest
information on supported operating systems, refer to the HP website:

http://hp.com/go/supportos

Install the operating system using the following instructions.

1.

Use the optional DVD drive or connect a USB CD-ROM drive to a USB connector.

2.

Connect a monitor to the video connector.

3.

Connect a mouse to the mouse connector.

4.

Connect a keyboard to the keyboard connector.

5.

Place the operating system CD in the CD-ROM drive and follow the instructions to
complete the server initialization process.

IMPORTANT: To enable the embedded NIC functionality on servers running Microsoft Windows
Server based operating systems, it is necessary to load the NIC drivers provided on the HP
ProLiant DL145 Support CD.

6.

Check the HP ProLiant DL145 Server Support CD for device drivers. The most current
drivers, INF files, ROM images, and diagnostics can be downloaded from the web at

www.hp.com/support

ProLiant DL145 Support CD

The HP ProLiant DL145 Server Support CD contains the following drivers:

•

For Microsoft Windows Server 2003

—

AMD-8131 Hyper Transport IOAPIC Controller

—

AMD-8111 High Precision Event Timer

—

Broadcom NetXtreme Gigabit Ethernet NIC Driver for Windows 2003

•

For Microsoft Windows 2000

—

AMD-8131 Hyper Transport IOAPIC Controller

—

AMD-8111 High Precision Event Timer

—

AMD-8111 System Management Controller

—

Broadcom NetXtreme Gigabit Ethernet NIC Driver for Windows 2000

«
...
55
56
57
58
59
...
»

Summary of Contents for ProLiant DL145










































































































Reviews:

No comments

Related manuals for ProLiant DL145

Brand: 2N Pages: 11

Brand: 2N Pages: 5

Brand: 2N Telekomunikace Pages: 24

Brand: Cabletron Systems Pages: 21

Brand: Lattice Semiconductor Pages: 15

Brand: hilscher Pages: 154

Brand: Renesas Pages: 941

Brand: Cytron Technologies Pages: 13

Brand: Softing Pages: 4

Easy Tool-ID BSG TID-05-T30-00-005

Brand: Balluff Pages: 46

memonizerWORKSTATION

Brand: MEMON Pages: 2

Brand: Patton electronics Pages: 145

Brand: Icy Box Pages: 2

Brand: IEI Technology Pages: 4

Brand: SilverStone Pages: 28

Brand: H3C Pages: 68

Brand: Z3 Technology Pages: 22

Brand: Freescale Semiconductor Pages: 42

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands