HP ProLiant DL1000 Quickspecs Download

Page: 33 / 51

HP Power Distribution

HP Power Distribution
Units

Units

HP Monitored Power Distribution Unit: Half Rack Version

HP 4.9 kVA S124 Monitored PDU- single input, 1Ø, 24A

AF914A

HP Monitored Power Distribution Unit: Full Rack Version

HP 8.6 kVA S1324 Monitored PDU- single input, 3Ø, 24A

AF504A

HP 8.3 S1140 Monitored PDU- single input, 1Ø, 40A

AF506A

NOTE:

NOTE: Please see the following QuickSpecs for additional information:

http://h18000.www1.hp.com/products/quickspecs/12118_ca/12118_ca.html

Modular Power Distribution Units 1U/0U (Up to 32 outlets)

NOTE:

NOTE: 1U/0U mounting brackets shipped with the unit (optimized for 10000 and
9000 series racks).

HP Modular Power Distribution Units (mPDU), High Volt Model, 24A (200-240 VAC)

252663-D72

8.3kVA Model - mPDU, 40A, High (power cord attached)

252663-D73

HP Modular Power Distribution Units (mPDU), High Volt Model, 16A (200-240 VAC)

NOTE:

NOTE: This PDU has a detachable input power cord and allows for adaptability to
country specific power requirements.

252663-B24

NOTE:

NOTE: Please see the following QuickSpecs for additional options including shorter
jumper cables and country specific power cords:

http://h18000.www1.hp.com/products/quickspecs/11041_ca/11041_ca.html

NOTE:

NOTE: For additional information on HP Power Distribution Units including
accessories please go to:

www.hp.com/go/pdu

HP Rack Series

HP Rack 10000 G2 Series

HP Rack 10000 G2 Series (Carbon/Graphite Metallic)

HP 10642 G2 Pallet Universal Rack

AF001A

HP 10642 G2 Shock Universal Rack

AF002A

NOTE:

NOTE: It is mandatory to use a shock pallet when shipping racks with equipment
installed.

NOTE:

NOTE: Please see the QuickSpecs for additional information:

http://h18000.www1.hp.com/products/quickspecs/12402_ca/12402_ca.html

NOTE:

NOTE: For additional information regarding Rack Cabinets, please see the following
URL:

http://www.hp.com/go/rackandpower

NOTE:

NOTE: The increasing power of new high-performance processor technology requires
increased cooling efficiency for rack-mounted servers. The 10000 G2 Series Racks
provide enhanced airflow for maximum cooling, allowing these racks to be fully
loaded with servers using the latest processors.
CAUTION:

CAUTION:

CAUTION: If a third-party rack is used, observe the following additional requirements
to ensure adequate airflow and to prevent damage to the equipment: Front and rear
doors: If your 42U server rack includes closing front and rear doors, you must allow
830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to
permit adequate airflow (equivalent to the required 64 percent open area for
ventilation). Side: The clearance between the installed rack component and the side
panels of the rack must be a minimum of 2.75 inches (7 cm).
CAUTION:

CAUTION:

CAUTION: Always use blanking panels to fill all remaining empty front panel U-
spaces in the rack. This arrangement ensures proper airflow. Using a rack without
blanking panels results in improper cooling that can lead to thermal damage.

QuickSpecs

HP ProLiant DL1000 Multi Node Server

Additional Options

DA - 13309 Canada — Version 31 — April 8, 2011

Page 33