HP ProLiant BL460c Gen9, User Manual

Page: 23 / 90

Operations 23
Remove a drive
1.
Back up all server blade data on the drive.
2.
Remove the drive.
Install the front panel/drive cage assembly
1.
Power down the server blade (on page 14 ).
2.
Remove the server blade (on page 15 ).
3.
Place the server blade on a flat, level work surface.
4.
Remove the access panel (on page 15 ).
5.
Do one of the following:
o
Remove the storage controller/NVMe pass-through board (on page 22 ).
o
Remove the direct connect SATA cable (on page 19 ).
6.
Install the front panel/drive cage assembly.
a.
Align the pins on the chassis and slide the front panel/drive cage assembly into the server.
b.
Secure the component with two T-15 screws.
c.
Close the serial label pull tab.
7.
Install all DIMM baffles (" Install the DIMM baffles " on page 17 ).
8.
Do one of the following:
o
Install the storage controller/NVMe pass-through board.