Operations 15
•
Use the Onboard Administrator GUI to initiate a shutdown:
a.
Select the
Enclosure Information
tab.
b.
In the Device Bays item, select the
Overall
checkbox.
c.
From the Virtual Power menu, initiate a shutdown of applications and the OS:
—
For a controlled shutdown, select
Momentary Press
.
—
For an emergency shutdown, select
Press and Hold
.
Before proceeding, verify that the server blade is in standby mode by observing that the system power
LED is amber.
Remove the server blade
1.
Identify the proper server blade.
2.
Power down the server blade (on page
3.
Remove the server blade.
4.
Place the server blade on a flat, level work surface.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent damage to electrical components, properly ground the server blade
before beginning any installation procedure. Improper grounding can cause ESD.
Remove the access panel
To remove the component:
1.
Power down the server blade (on page
2.
Remove the server blade (on page
3.
Place the server blade on a flat, level work surface.
4.
Press the access panel release button.
Summary of Contents for ProLiant BL460c Gen9
Page 82: ...Support and other resources 82 ...
