18-25
Troubleshooting
Diagnostic Tools
Tro
ubl
e
shoo
tin
g
CLI Administrative and Troubleshooting Commands
These commands provide information or perform actions that you may find
helpful in troubleshooting operating problems with the switch.
N o t e
For more on the CLI, refer to chapter 3, "Using the Command Line Reference
(CLI).
Syntax:
show version
Shows the software version
currently running on the switch,
and the flash image from which the
switch booted (primary or
secondary).
show boot-history
Displays the switch shutdown
history.
show history
Displays the current command
history.
[no] page
Toggles the paging mode for
display commands between
continuous listing and per-page
listing.
setup
Displays the Switch Setup screen
from the menu interface
repeat
Repeatedly executes the previous
command until a key is pressed.
kill
Terminates all other active
sessions.
Summary of Contents for ProCurve 4108gl Bundle
