HP ProCurve 4108gl Bundle, Management And Configuration Manual, Page: 37 / 483

2-13
Using the Menu Interface
Rebooting the Switch
U
si
n
g t
h
e Me
nu
In
te
rfa
c
e
Rebooting To Activate Configuration Changes.
Configuration changes
for most parameters in the menu interface become effective as soon as you
save them. However, you must reboot the switch in order to implement a
change in the
Maximum VLANs to support parameter
. (To access this parameter, go
to the Main Menu and select:
2. Switch Configuration
8. VLAN Menu
1. VLAN Support
.)
If you make configuration changes in the menu interface that require a reboot,
the switch displays an asterisk (
* ) next to the menu item in which the change
has been made. For example, if you change and save the value for the Maximum
VLANs to support
parameter, an asterisk appears next to the
VLAN Support
entry in
the VLAN Menu screen, and also next to the the
Switch Configuration . . .
entry in
the Main Menu, as shown in figure 4-6:
Figure 2-7. Indication of a Configuration Change Requiring a Reboot
To activate changes indicated by the asterisk, go to the Main Menu and select
the
Reboot Switch option.
N o t e
Executing the write memory command in the CLI does not affect pending
configuration changes indicated by an asterisk in the menu interface. That is,
only a reboot from the menu interface or a
boot
or
reload
command from the
CLI will activate a pending configuration change indicated by an asterisk.
Reminder to
reboot the switch
to activate
configuration
changes.
Asterisk indicates
a configuration
change that
requires a reboot
in order to take
effect.