HP ProCurve 2510G Series Manual Download Page 86

Page: 86 / 320

4-12

Authentication

Configuring on the Switch

Command Syntax

Syntax:

aaa authentication

Selects the access method for configuration.

< enable>

The server grants privileges at the Manager privilege
level.

The server grants privileges at the Operator privilege
level. If the

privilege-mode

option is entered, is

enabled for a single login. The authorized privilege level
(Operator or Manager) is returned to the switch by the
server.

Default: Single login disabled.

< local | tacacs | radius >

Selects the type of security access:

local

—

Authenticates with the Manager and Operator

password you configure in the switch.

tacacs

—

Authenticates with a password and other

data configured on a server.

radius

—

Authenticates with a password and other

data configured on a RADIUS server.

[< local | none >]

If the primary authentication method fails, determines
whether to use the local password as a secondary method
or to disallow access.

aaa authentication num-attempts < 1-10 >

Specifies the maximum number of login attempts allowed in
the current session. Default: 3

Summary of Contents for ProCurve 2510G Series

































































































































































































































































































































Search results

Summary of Contents for ProCurve 2510G Series

Reviews:

Related manuals for ProCurve 2510G Series

Brands by name

Popular brands

HP ProCurve 2510G Series, Manual

Search results

Summary of Contents for ProCurve 2510G Series

Reviews:

Related manuals for ProCurve 2510G Series

Brands by name

Popular brands