manualshive.com logo in svg

HP ProBook 5330m, Maintenance And Service Manual

Share
Download
HP ProBook 5330m Maintenance And Service Manual Download Page 95

Computer Setup

Maintenance and Service Guide

5–11

Select

To do this

System Configuration menu

 

(continued)

Device Configurations 

(continued)

■

Enable/disable Data Execution Prevention. When enabled, 
the processor can disable some virus code execution, 
which helps to improve computer security.

■

Enable/disable LAN Power Save (select models only). 
When enabled, saves power by turning off the LAN when 
not in use (enabled by default).

■

SATA (Serial Advanced Technology Attachment) device 
mode. The following options are available:

❐

AHCI (Advanced Host Controller Interface)

❐

IDE (Integrated Drive Electronics)

❐

RAID (select models only)

✎

Availability of the options above varies by 
computer model.

■

Enable/disable secondary battery fast charge (enabled 
by default).

■

Enable/disable HP QuickLook 3 (enabled by default).

■

Enable/disable Virtualization Technology (select models 
only; disabled by default).

■

Enable/disable TXT (Intel Trusted Execution Technology) 
(select models only; disabled by default).

■

Enable/disable Dual Core CPU (select models only; 
enabled by default).

■

Enable/Disable Unified Extensible Firmware Interface 
(UEFI) mode (disabled by default). 

■

Turn the Numlock state at boot on or off.

Built-In Device Options

■

Enable/disable the wireless button state (enabled 
by default).

■

Enable/disable the embedded WLAN device (enabled 
by default).

■

Enable/disable embedded WWAN device radio (select 
models only; enabled by default).

■

Enable/disable embedded Bluetooth device radio (enabled 
by default).

■

Enable/disable the Network Interface Controller (LAN) 
(enabled by default).

■

Enable/disable LAN/WLAN switching (disabled by default).

■

Set the wake on LAN state. Options include the following:

❐

Disabled

❐

Boot to Network (set by default)

❐

Follow Boot Order

■

Enable/disable the fingerprint device (enabled by default).

(Continued)

Summary of Contents for ProBook 5330m






































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands