Removal and replacement procedures
Maintenance and Service Guide
4–43
Display assembly
✎
The display assembly spare part kit includes 2 WLAN antenna transceivers and cables, 2 WWAN antenna
transceivers and cables, webcam, nameplate, and logo.
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-7
).
5. Remove the following components:
a. Accessory cover (see
“Mass storage device” on page 4-9
)
b. Keyboard (see
“Keyboard” on page 4-23
)
c. Button board and cable (see
“Button board and cable” on page 4-26
)
d. Top cover (see
“Top cover” on page 4-28
)
e. System board (see
“System board” on page 4-33
)
Remove the display assembly:
1. Remove the WLAN and WWAN antenna cables
1
from the clips
2
built into the base enclosure.
Description
Spare part number
13.3-in, HD, LED, AntiGlare display assembly
618827-001
13.3-in, HD, LED, BrightView display assembly
618828-001
