background image

Speaker assembly

Description

Spare part number

Speaker assembly

723674-001

NOTE:

You must remove the left speaker to remove to function board cable.

Before removing the speaker assembly, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet,

and then unplugging the AC adapter from the computer.

4.

Remove the battery (se

Battery on page 34

).

5.

Remove the following components:
a.

Service door (see 

Service door on page 35

).

b.

Keyboard (see 

Keyboard on page 45

)

c.

Optical drive (

Optical drive on page 39

)

d.

Top cover (see 

Top cover on page 47

)

Remove the speaker assembly:

1.

Position the top cover upside-down.

2.

Remove the 2 Phillips PM2.5×6.0 shoulder screws (1) that secure the speakers to the computer.

3.

Lift the side of each speaker opposite of the screw, and then pull each speaker out from under

the tab on the top cover (2).

4.

Remove the speaker cables from the clips built into the top cover (3).

Component replacement procedures 57

Summary of Contents for ProBook 470 G1






















































































































































Reviews:

Related manuals for ProBook 470 G1