HP Pro x2 612 G1 User Manual Download

Page: 56 / 94

Connect the device to the computer.

If you are connecting a powered device, plug the device power cord into a grounded AC outlet.

Turn on the device.

To disconnect an unpowered external device, turn off the device, and then disconnect it from the

computer. To disconnect a powered external device, turn off the device, disconnect it from the

computer, and then unplug the AC power cord.

Using optional external drives

Removable external drives expand your options for storing and accessing information. A USB drive

can be added by connecting the drive to a USB port to the computer.

NOTE:

HP external USB optical drives should be connected to the powered USB port to the

computer.
USB drives include the following types:

●

1.44-megabyte diskette drive

●

Hard drive module

●

External optical drive (CD, DVD, and Blu-ray)

●

MultiBay device

46 Chapter 7 External cards and devices

Summary of Contents for Pro x2 612 G1































































































Search results

Summary of Contents for Pro x2 612 G1

Reviews:

Related manuals for Pro x2 612 G1

Brands by name

Popular brands

HP Pro x2 612 G1, User Manual

Search results

Summary of Contents for Pro x2 612 G1

Reviews:

Related manuals for Pro x2 612 G1

Brands by name

Popular brands