HP Pro x2 612 G1 User Manual Download Page 3

Page: 3 / 94

Safety warning notice

WARNING!

To reduce the possibility of heat-related injuries or of overheating the computer, do not

place the computer directly on your lap or obstruct the computer air vents. Use the computer only on

a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft

surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to

contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer

and the AC adapter comply with the user-accessible surface temperature limits defined by the

International Standard for Safety of Information Technology Equipment (IEC 60950).

iii

Summary of Contents for Pro x2 612 G1































































































Search results

Summary of Contents for Pro x2 612 G1

Reviews:

Related manuals for Pro x2 612 G1

Brands by name

Popular brands

HP Pro x2 612 G1, User Manual

Search results

Summary of Contents for Pro x2 612 G1

Reviews:

Related manuals for Pro x2 612 G1

Brands by name

Popular brands