5.
Use the notch (4) inside the I/O area to release the back cover (5).
Reverse this procedure to install the back cover.
Battery
Description
Spare part number
Battery, 2-cell, 28.49-WHr, LI (includes cable, stylus pen holder, and double-sided adhesive)
802833-001
Before removing the battery, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover on page 23
).
WARNING!
To reduce potential safety issues, use only the battery provided with the tablet, a replacement
battery provided by HP, or a compatible battery purchased from HP.
CAUTION:
Removing a battery that is the sole power source for the tablet can cause loss of information.
To prevent loss of information, save your work or shut down the tablet through Windows before removing
the battery.
Remove the battery:
24
Chapter 5 Removal and replacement procedures
