HP photosmart 120 SERIES, User Manual

Page: 43 / 76

5-Troubleshooting and Support 43
My image is
too dark.
There was not
enough light.
Wait for natural lighting
conditions to improve or add
indirect lighting.
The flash was
on, but the
subject was
too far away.
Make sure your subject is
within 3 meters (approximately
9 feet) of the camera when you
take the picture.
A light shone
behind the
subject.
Use the Flash On setting to
brighten the subject when there
is a bright light such as the sun
or a window behind your
subject.
Your finger
blocked the
flash.
Be sure to move your fingers
away from the flash when you
take a picture.
My image is
too bright.
The flash
provided too
much light.
Change the flash setting to
Flash Off .
A natural or
artificial
source other
than the flash
provided too
much light.
Try taking the picture from a
different angle. Avoid pointing
the camera directly toward a
bright light or reflective surface
on a sunny day. If there is light
behind your subject, use the
Flash On setting.
You were too
close to the
subject to use
the flash.
Move back from the subject or
set the flash to Flash Off and
take the picture again.
Problem Possible cause Solution