HP photosmart 120 SERIES, User Manual, Page: 23 / 76

2-Taking Pictures 23
Using the flash
When the camera is on, the flash is automatically set to
Auto Flash . If you change the flash setting, the camera will
remain in that setting until you change it again or turn off the
camera. By using the
Flash button, you can move through
the flash settings in the following order.
Changing the image quality
The camera has three image quality settings: Good , Better , and
Best . You can view the quality setting on the Display .
This setting determines the quality of your images and how
many images can be stored in internal memory or on the
CF memory card. Higher quality images take up more space in
memory. The following table identifies the approximate number
of pictures that you can take at each setting based on internal
memory or an 8 MB CF memory card.
Mode Description
Auto Flash The camera measures light and flashes if
necessary.
Flash On The camera always flashes. If the light is
behind your subject, you can use the flash to
increase the light on the front of your subject.
This is also called “fill-flash.”
Flash Off The camera will not flash. Use this setting
when you do not want a flash (such as with
bright conditions or distant objects).