manualshive.com logo in svg

HP Pavilion xz300, Service Manual, Page: 37 / 100

Share
Download
HP Pavilion xz300 Service Manual Download Page 37

Technology Code ID) 

Removal and Replacement 

2-15 

Replacing Small Parts 

(User-Replaceable)

 

The user can replace the following small parts. 

Table 2-4. Replacing Small Parts (User-Replaceable) 

Part 

Part Numbers 

Replacement Procedure 

Cover, mini-PCI 

Included in door kit 
F3377-60933 

On the bottom of the notebook, loosen the screw in the mini-PCI 
cover (the cover retains the screw) and remove the cover. 

Cover, expansion 
SDRAM 

Included in door kit 
F3377-60933 

On the bottom of the notebook, loosen the screw in the SDRAM 
module cover (the cover retains the screw) and remove the cover. 

Covers, screw (on 
display bezel) 

Included in 
feet/cover kit 
F3377-60967 

Insert a small flat-blade screwdriver under the cover and pry it loose. 
To replace, firmly press the adhesive side of the cover into the 
recess. 

Feet, rubber 

Included in 
feet/cover kit 
F3377-60967 

Insert a small flat-blade screwdriver under the foot and pry it loose. 
To replace, firmly press the adhesive side of the foot into the recess. 

 

Summary of Contents for Pavilion xz300





































































































Reviews:

No comments