manualshive.com logo in svg

HP Pavilion m7-1000, Maintenance And Service Manual

Share
Download
HP Pavilion m7-1000 Maintenance And Service Manual Download Page 92

Remove the Card Reader board:

1.

Remove the Phillips PM2.0×3.0 screw 

(1)

 that secures the Card Reader board to

the system board.

2.

Remove the Card Reader board 

(2)

.

Reverse this procedure to install the Card Reader board.

Subwoofer

Description

Spare part number

Subwoofer (includes subwoofer cable, front speaker passthrough cable, and 2 rubber isolators)

681996-001

Before removing the subwoofer, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the battery (see 

Battery on page 45

), and then remove the following components:

a.

Hard drive (see 

Hard drive on page 46

)

b.

Optical drive (see 

Optical drive on page 51

)

c.

Keyboard (see 

Keyboard on page 57

)

84

Chapter 4   Removal and replacement procedures

Summary of Contents for Pavilion m7-1000





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands