manualshive.com logo in svg

HP Pavilion m7-1000, Maintenance And Service Manual

Share
Download
HP Pavilion m7-1000 Maintenance And Service Manual Download Page 84

10.

Disconnect the power connector cable 

(2)

 from the system board.

11.

Remove the four Phillips PM2.5×6.0 screws 

(1)

 that secure the system board to

the base enclosure.

12.

Lift the right side of the system board 

(2)

 until it rests at an angle.

13.

Remove the system board 

(3)

 by sliding it up and to the right at angle.

Reverse this procedure to install the system board.

Fan/heat sink assembly

NOTE:

The fan/heat sink assembly spare part kit includes replacement thermal material.

Description

Spare part number

For use only on computer models equipped with an AMD processor and a graphics subsystem
with discrete memory

682179-001

For use only on computer models equipped with an AMD processor and a graphics subsystem
with UMA memory

682178-001

76

Chapter 4   Removal and replacement procedures

Summary of Contents for Pavilion m7-1000





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands