HP Pavilion g4-1300 User Manual Download Page 21

Page: 21 / 99

Left

Component

Description

(1)

External monitor port

Connects an external VGA monitor or projector.

(2)

Vents (2)

Enable airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during routine
operation.

(3)

RJ-45 (network) jack

Connects a network cable.

(4)

HDMI port

Connects an optional video or audio device, such as a
high-definition television, or any compatible digital or
audio component.

(5)

USB 2.0 ports (2)

Connect optional USB devices.

(6)

Audio-in (microphone) jack

Connects an optional computer headset microphone,
stereo array microphone, or monaural microphone.

(7)

Audio-out (headphone) jack

Produces sound when connected to optional powered
stereo speakers, headphones, earbuds, a headset, or
television audio.

WARNING!

To reduce the risk of personal injury, adjust

the volume before putting on headphones, earbuds, or a
headset. For additional safety information, refer to the

Regulatory, Safety, and Environmental Notices

NOTE:

When a device is connected to the jack, the

computer speakers are disabled.

(8)

Hard drive light

●

Blinking white: The hard drive or optical drive is
being accessed.

●

Amber: HP 3D DriveGuard has temporarily parked
the hard drive.

Left

Summary of Contents for Pavilion g4-1300




































































































Search results

Summary of Contents for Pavilion g4-1300

Reviews:

Related manuals for Pavilion g4-1300

Brands by name

Popular brands

HP Pavilion g4-1300, User Manual

Search results

Summary of Contents for Pavilion g4-1300

Reviews:

Related manuals for Pavilion g4-1300

Brands by name

Popular brands