manualshive.com logo in svg

HP PAVILION DV5, Maintenance And Service Manual, Page: 91 / 135

Share
Download
HP PAVILION DV5 Maintenance And Service Manual Download Page 91

4.

Remove the fan/heat sink assembly 

(4)

.

NOTE:

Due to the adhesive quality of the thermal material located between the fan/heat sink

assembly and system board components, it may be necessary to move the fan/heat sink assembly
from side to side to detach it.

NOTE:

The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink

assembly and the system board each time the fan/heat sink assembly is removed. Replacement thermal
material locations vary by computer model.

Computer models equipped with a graphics subsystem with discrete memory have replacement thermal
material locations as shown in the following illustration:

●

Thermal paste is used on the processor 

(1)

 and the heat sink section 

(2)

 that services it

●

A thermal pad is used on the graphics subsystem chip 

(3)

 and the heat sink section 

(4)

 that

services it

Component replacement procedures

81

Summary of Contents for PAVILION DV5








































































































































Reviews:

No comments