Optical drive cable
NOTE:
The optical drive cable and bracket are included in the base enclosure spare part kit, spare
part number 606884-001.
Before removing the optical drive cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 49
), and then remove the following components:
a.
Memory module/wireless module compartment cover (see
Memory module on page 50
)
b.
Hard drive cover (see
Hard drive on page 58
)
c.
Optical drive (see
Optical drive on page 63
)
d.
Keyboard (see
Keyboard on page 64
)
e.
Top cover (see
Top cover on page 67
)
Remove the optical drive cable:
1.
Disconnect the optical drive cable
(1)
from the system board.
2.
Remove the Phillips PM2.0×3.0 screw
(2)
that secures the optical drive cable to the base
enclosure.
3.
Remove the optical drive cable bracket
(3)
.
4.
Remove the optical drive cable
(4)
.
Reverse this procedure to install the optical drive cable.
Component replacement procedures
73
Summary of Contents for PAVILION DV5
