manualshive.com logo in svg

HP PAVILION DV5, Maintenance And Service Manual, Page: 103 / 135

Share
Download
HP PAVILION DV5 Maintenance And Service Manual Download Page 103

c.

Release the WLAN antenna transceivers 

(3)

 from the display enclosure. (The WLAN antenna

transceivers are attached to the display enclosure with double-sided tape.)

d.

Remove the WLAN antenna cables and transceivers. The WLAN antenna cables and
transceivers are included in the Wireless Antenna Kit, spare part number 607584-001.

11.

If it is necessary to replace the WWAN antenna cables and transceivers:

a.

Release the tabs 

(1)

 built into the display enclosure shielding that secure the WWAN

antenna cables to the display enclosure.

b.

Release the WWAN antenna cables 

(2)

.

c.

Release the WWAN antenna transceivers 

(3)

 from the display enclosure. (The WWAN

antenna transceivers are attached to the display enclosure with double-sided tape.)

d.

Remove the WWAN antenna cables and transceivers. The WWAN antenna cables and
transceivers are included in the Wireless Antenna Kit, spare part number 607584-001.

Reverse this procedure to reassemble and install the display assembly.

Component replacement procedures

93

Summary of Contents for PAVILION DV5








































































































































Reviews:

No comments