HP Pavilion 15-bc200, Maintenance And Service Manual, Page: 65 / 93

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the base enclosure (see Base enclosure on page 27 ), and then remove the following
components:
a. Display assembly (see Display assembly on page 29 ).
b. Hard drive (see Hard drive on page 31 ).
c. SSD (see SSD (M.2) on page 33 ).
d. Memory (see Memory on page 34 ).
e. WLAN module (see WLAN module on page 37 ).
f. Battery (see Battery on page 39 ).
g. USB (see USB board on page 42 ).
h. Power button board (see Power button board on page 43 ).
i. Fan (see Fan on page 45 ).
j. Heat sink for discrete graphics (see Heat sink for discrete graphics memory on page 46 ).
k. Heat sink for CPU and graphics (see Heat sink for CPU and graphics on page 48 ).
l. System board (see System board on page 53 ).
m. RTC battery (see RTC battery on page 55 ).
Remove the power connector:
▲ Disconnect the connector cable, and then remove the power connector.
Reverse this procedure to install the power connector.
Component replacement procedures 57